Anker has launched a brand new multi-device charger that includes 4 USB-C ports. This charger is able to offering as much as 120W on the similar time, offered you are able to do a little bit of math.
The way in which this works is that completely different ports on the charger have completely different outputs. One of many ports is able to sending as much as 100W of energy by itself if it is the one one in use. One other one can do as much as 60W after which the remaining two can do 20W every.
Now, in case you plug in two units, the 100W port drops right down to 90W in case you use one of many two 20W ports or 60W in case you use the 60W port. And in case you’re charging three units, then the 100W port drops right down to 60W and the 60W port drops right down to 30W relying upon which different port is getting used. And if all ports are in use, the 100W port drops right down to 50W.
It is all a bit sophisticated however with a little bit of use you will not should bust out a calculator each time you wish to use this factor. Nonetheless, when you have a bunch of USB-C units to cost, the Anker 547 can crank out a ton of energy without delay; even with all ports in use you’re getting at the least 20W per port, which will be sufficient for a lot of units.
Other than that, the charger makes use of a cable to plug into the mains as an alternative of plugging in immediately. The cable is removable, which ought to make it handy whereas touring. The charger options the standard security options, reminiscent of output high-voltage safety, enter short-circuit safety, enter present regulation, temperature management, and so forth.
The Anker 547 is priced at $120 and accessible on Amazon.