Atomos provides 8K ProRes RAW Recording to Canon’s EOS R5, 5.9K ProRes RAW to Panasonic’s BS1H and extra: Digital Pictures Assessment

0
1


Atomos has introduced an replace for its Ninja V and Ninja V+ that brings new ProRes RAW Recording choices for Canon’s EOS R5, Panasonic’s Lumix BS1H and legacy Sony FS collection cinema cameras. AtomOS model 10.71 additionally provides help for Atomos’ new AtomX Solid {hardware} with the Ninja V+.

Canon EOS R5

On Canon’s EOS R5 mirrorless digicam, AtomOS model 10.71 provides the power to document as much as 5K/30p (5088 x 2680 pixels) ProRes RAW on the Ninja V and as much as 5K/60p or 8K/30p PreRes RAW on the Ninja V+. The replace additionally provides slider changes for white stability and ISO Controls in Ultimate Lower Professional X. Curiously, these recording modes with the EOS R5 have a slew of caveats that Atomos particularly takes the time to say.

First, in case you set off the recording by way of the digicam’s document button, you’ll be restricted to the 29:59 minute document time restrict, whereas in case you set off the recording on the Ninja V/V+’s display screen, you received’t have that restrict. Atomos additionally suggests utilizing the EOS R5’s ‘Standby: Low Res’ mode when recording RAW for prolonged intervals of time to make sure you get the utmost recording time potential. Atomos additionally notes the Ninja V’s display screen and enclosure ‘will get very heat throughout 5K ProRes RAW recording and says that whereas the unit is designed for this and has security options to stop overheating, you would possibly need to train warning when utilizing the gadget in areas with excessive ambient temperatures.

Beneath is an inventory of the document closing dates of the EOS R5 when used with the Ninja V, primarily based on space for storing:

• 1TB @ 5K30 ProRes RAW HQ: 45 minutes

• 1TB @ 5K30 ProRes RAW: 61 minutes

• 500GB @ 5K30 ProRes RAW HQ: 22 minutes

• 500GB @ 5K30 ProRes RAW: 30 minutes

Panasonic Lumix BS1H

On Panasonic’s boxy Lumix BS1H digicam system, AtomOS model model 10.71 brings new and improved taking pictures modes when paired with each the Ninja V and Ninja V+, in addition to slider changes for White Steadiness and ISO controls in Ultimate Lower Professional X. Beneath is an inventory of the ProRes RAW Recording modes with each the Ninja V and Ninja V+ when related to a Lumix BS1H by way of HDMI:

• 5.9K (5888 x 3312) at 23.98p, 25p, 29.97p

• 4.1K (4128 x 2176) at 23.98p, 25p, 29.97p, 50p, 59.94p

• 3.5K Anamorphic (3536 x 2656) at 23.98p, 25p, 29.97p, 50p, 59.94p

Sony FS Collection

Lastly, AtomOS model 10.71 provides a slew of recent taking pictures modes to 6 of Sony’s FS collection digicam methods when paired with the corporate’s new Ninja V+ monitor/recorder with the SDI Module hooked up. Beneath is a breakdown of the brand new recording modes on every of the six cameras:

Sony FS5 (with RAW Improve) / FS5 II

• 4K (4096 x 2160) at 24p, 25p, 30p, 50p, 60p, 100p, 120p o 2K (2048 x 1080) at 100p, 120p, 200p, 240p

Sony FS700 (with RAW Improve) / FS700R

• 4K (4096 x 2160) at 24p, 25p, 30p, 50p, 60p, 100p, 120p o 2K (2048 x 1080) at 100p, 120p, 200p, 240p

Sony FS7 (with XDCA-FS7) / Sony FS7 II (with XDCA-FS7)

• 4K (4096 x 2160) at 24p, 25p, 30p, 50p, 60p

• 2K (2048x 1080) at 24p, 25p, 30p, 50p, 60p, 100p, 120p, 200p, 240p

Atomos clarifies the above asterisks, saying ‘4K at 100/120p is out there in an S&Q burst mode which is buffered within the digicam and output as a 60p sign.’

AtomX Solid

The AtomoOS 10.71 firmware replace additionally makes it potential to make use of Atomos’ new AtomX Solid {hardware} with its new Ninja V+ monitor/recorder, turning it into a strong livestreaming resolution. Beneath are an inventory of different enhancements the firmware replace provides to the AtomX Solid when paired with each the Ninja V and Ninja V+:

• Introduction of “Dip to”-transitions, out there in black & white. These could be mechanically utilized on every swap from one enter to a different.

• Addition of up to date program recording choices. Select “Clear” to document a clear feed of the presently switched to enter or use the brand new “CAST Program” mode. In CAST Program mode, graphical overlays and the image in image (PiP) get recorded onto the SSD/HDD inserted within the Ninja V. The recording incorporates the brand new “Dip to”-transitions in addition to the Fade In/Fade Out buttons used to fade in or fade out of your program throughout recording.

• Interlaced indicators are actually supported. An automated pulldown conversion will get utilized to them, which then will get conformed to the Challenge Fee.

• Audio delay choices are actually out there, which apply body delays to all audio inputs together with analog and embedded audio (calibrate function not supported).

• Normal bug fixes.

You may obtain AtomOS firmware model 10.71 for the Ninja V and Ninja V+ on Atomos’ product help web page and study all the brand new suggestions and tips with varied setup guides on Atomos’ YouTube channel.

LEAVE A REPLY

Please enter your comment!
Please enter your name here