RAID 0 Vs RAID 1 – What’s The Distinction



RAID 0 presents one thing often known as striping with no mirroring however technically it isn’t redundant. Stripping is when knowledge is break up evenly throughout two or extra drives, primarily segmenting the info between the totally different drives. Sadly, there are points with this sort of RAID, as if one disk fails, then the whole RAID 0 setup additionally fails as a result of the info is saved in different bits, making it fully unusable. RAID 0 additionally means it’s important to purchase multiple drive and whilst you get higher efficiency, you double your probabilities of dropping your knowledge with doable failures.


RAID 1 has an enormous sensible software to the common client as a result of in contrast to increased ranges of RAID, you don’t want sophisticated controllers to ensure that it to work properly. RAID 1 can also be a real RAID as a result of you’ve gotten redundant storage of your knowledge. RAID 1, like RAID 0, additionally requires a minimum of two drives and works by storing your knowledge segments on each drives. Because of this each drives include your whole knowledge, providing you with no efficiency advantages, nevertheless, your knowledge is actually backed up if one drive fails.


We already touched upon the reliability for each RAID 1 and 0, with RAID 1 the one one which protects your knowledge from a drive failure. This, in fact, sacrifices efficiency and will increase prices however what’s the efficiency of each forms of RAID really like? Nicely, let’s have a look.

Learn/ Write

RAID 0 presents very quick learn and write speeds as a result of the info is break up between two or extra drives. The switch speeds are solely restricted by the pace of the RAID controller and usually, the switch pace of the array is the switch pace of all of the disks.

RAID 1 is way slower than RAID 0, nevertheless, has the identical pace when writing to a single disk. The rationale it’s gradual is as a result of RAID 1 is actually writing all the pieces twice when utilizing two drives. On the subject of learn speeds, RAID 1 once more surfers by way of efficiency however this will rely upon the RAID controller.


The capability distinction is clearly an enormous between RAID 1 and 0, with RAID 1 primarily writing the info throughout each drive. This takes up twice as a lot storage as RAID 0, nevertheless, clearly has its reliability advantages as a substitute.

RAID 1 & RAID 0 Combos

Combining the 2 RAIDs is one more doable resolution in the case of storing knowledge. When combining the 2, there are two outcomes – RAID 01 and RAID 10. RAID 10 is a little more extensively used as it’s the superior approach whereas using the identical quantity of drives. The efficiency between each RAID 01 and RAID 10 is identical, as is storage capability, nevertheless, the fault tolerance degree of RAID 10 is way more.

Combining RAID 0 and RAID 1

RAID 10 is often known as RAID 1+0 and is a configuration that mixes disk striping and mirroring to assist shield your knowledge. It’s worthwhile to have a minimum of 4 drives for this to work nevertheless it primarily stripes throughout mirrored pairs and so long as one of many disks in every pair continues to be functioning, you may nonetheless retrieve your knowledge.

RAID 10 offers knowledge redundancy and improves efficiency on the similar time. It’s a highly regarded choice, with little downtime to fret about, together with excessive learn and write speeds. The 4 disk minimal does carry loads of additional prices, which may make it an overkill choice for lots of shoppers.


Please enter your comment!
Please enter your name here