Getting that candy orbiting shot round your topic generally is a huge ache. There are, in fact, professional options to this downside, however they’ll value so much.
There’s usually one good resolution to the fee downside: DIY. Constructing your personal rigging shouldn’t be at all times as laborious because it appears and infrequently you may get it arrange in a greater or extra customized configuration based mostly in your particular wants.
With that in thoughts, in the present day we’re going to try an awesome-looking orbit digicam rig from Bestboy Adam. From the preliminary samples it undoubtedly does the job of making a candy orbiting shot and it appears very effectively constructed as effectively.
Off-the-shelf choices are nice should you can afford them they usually suit your wants. One thing chances are you’ll run into is that they don’t have the load capability you want for all of your lenses or they lack the controls or changes you need for a selected shot. We will repair this by constructing your personal.
Let’s speak about what it is advisable to get began:
That is going for use to create a heavy-duty model that may maintain as much as 150 kg (or round 330 lb). When you don’t want something that critical you’ll be able to swap out the elements for smaller, lighter, and cheaper items.
For instance, changing the 50mm pipe with 35mm pipe will do exactly positive for easy product work and nonetheless most likely be over constructed. You can even swap out wooden for the plates should you solely want one thing primary.
Now that you’ve got your stuff you may get constructing. You’ll need to construct a base with the aluminum plates. You’ll want to seek out the middle of the plates after which mark the place the Kipp connector needs to be secured.
He drilled holes for the connector in addition to holes close to the sting for mounting a desk to it or utilizing additional clamps.
Mount the connectors to every plate. Subsequent, he makes use of a metal 50mm shaft which he slides into one of many connectors. Now, take your flange bearings and slide them over the shaft.
Then, you’ll be able to take your clamps and fasten them to the flanges. Your different pipes can now be fitted to the rig and the highest plate might be mounted.
Be mindful, that you would be able to at all times swap out or alter the pipes to make it work for various shot varieties.
This needs to be trying nice already and you need to have a properly rotating rig with a static heart plate/desk space. Utilizing some low-cost double clamps he is ready to mount one other pipe perpendicular to the 2 most important pipes.
Then, a primary clamp with a camera-rig-compatible threading/screw might be hooked up to your rig and also you simply clamp the digicam to this pipe. Utilizing a clamp and pipe makes it straightforward to regulate the angle.
You’ll need to counterweight the rig. In case your setup is comparatively mild you would possibly be capable to get away with simply tossing a sandbag on the opposite aspect.
For a extra critical setup, you’ll need to get some weights and clamps and safe it to the other aspect of the digicam.
Determining how a lot counterweight is an easy course of. If the pipe is centered then you definately simply want the identical weight on either side. If one aspect is longer than one other you’ll must do some math.
Multiply the size of the pipe on the longer aspect (assuming that is the digicam aspect). Take that consequence and divide it by the size of the pipe on the quick aspect and you need to now have your counterweight weight.
It ought to work now! Although you’ll be able to at all times tinker with it.
One factor chances are you’ll need to do is shoot with the digicam at eye stage. To do that you’ll want a pair additional pipes and the Kipp cross connectors.
Add these connectors to the top of your pipes and have the brand new pipes sticking straight up. Now you’ll be able to mount the digicam in the identical weight at a a lot better top.
One other modification is making use of the pre-drilled holes to connect a bigger base for working with bigger topics. Utilizing a bigger wooden platform or different floor with drilled holes ought to make this straightforward.
With some care if you’ll be able to get the pipes mounted on a ceiling you may even connect this orbiting rig the wrong way up for some cool configurations. Some heavy-duty tripods would possibly even be capable to do it.
Sooner or later, you could possibly add a controllable motor for extra exact actions.
This factor is stable and he exhibits off pictures with an individual standing on the middle plate. It holds a Blackmagic Pocket digicam with DJI RS 3 with ease.
He additionally hooks up the DJI Ronin-4D as effectively. Even greater rigs needs to be positive and he thinks a digicam rig as much as 75 kg (165 lb) can be simply positive with correct counterweighting.
Complete value runs below $100.
What do you concentrate on this DIY rig? Assume you’ll strive it your self?
[source: Bestboy Adam]